Loctite Rearview Mirror Adhesive
Loctite Rearview Mirror Adhesive
$13.95
  • Details
  • SDS
  • Video
LOCRVMIRROR487865


Adhesive permanently remounts mirrors to windshields
LOCTITE® Rearview Mirror Adhesive is approved and used by GM, Ford and Daimler-Chrysler. Permanently remounts mirrors to windshields. Achieves handling strength in seconds; mirror-mounting strength in 15 minutes. Available in single and multi-application size packaging. Typical Applications: Mounting rearview mirrors to windshields.

Directions: 
  1. Remove mirror-mounting button from mirror bracket.
  2. Mark OUTSIDE of windshield with crayon/marking pen to identify old location of rearview mirror.
  3. Thoroughly scrape inside windshield glass and mirror button with a safety razor or utility knife to remove old adhesive. Wipe clean with an alcohol saturated cloth.
  4. Squeeze activator ampule until vial inside breaks, releasing activator to felt tip. Remove paper sleeve. 
  5. Apply a good amount of activator to the mounting surface of the mirror button and windshield where the button is to be positioned. Allow activator to dry for 5 minutes. DO NOT TOUCH mounting surface of the button or the glass.
  6. Cut or break off the adhesive cap. Apply a drop of adhesive to center button.
  7. Immediately apply the button to the windshield, making sure it is the right way up, and hold firmly for 1 minute. Allow to set for 15 minutes. Mount mirror to button.
Mastercard
Mastercard
Visa
Visa
Stripe
Stripe
PayPal
PayPal